Modelling the time‐dependent behaviour of granular material with hypoplasticity          下载免费PDF全文

Shun Wang  Wei Wu  Zhen‐Yu Yin  Chong Peng  Xuzhen He 《国际地质力学数值与分析法杂志》2018,42(12):1331-1345

This paper presents a constitutive model for time‐dependent behaviour of granular material. The model consists of 2 parts representing the inviscid and viscous behaviour of granular materials. The inviscid part is a rate‐independent hypoplastic constitutive model. The viscous part is represented by a rheological model, which contains a high‐order term denoting the strain acceleration. The proposed model is validated by simulating some element tests on granular soils. Our model is able to model not only the non‐isotach behaviour but also the 3 creep stages, namely, primary, secondary, and tertiary creep, in a unified way.  相似文献   

鄂尔多斯地块周缘垂直形变场负位错反演与应变积累研究     

张希  刘立炜  郝明  白卓立 《大地测量与地球动力学》2019,39(6):551-556

利用鄂尔多斯地块及其周缘1970～2014年的垂直形变速率场资料，借助负位错反演研究该区域长期应变积累。结果表明，地块东北缘山西断陷带中北段年均能量积累增量、剪应力强度都较高，西南缘六盘山断裂与渭河断裂西段次之；山西断陷带中南段至晋陕交界处年均剪应力强度较高且显示一定程度的能量积累；西秦岭构造区尤其西秦岭北缘断裂西段、晋冀蒙交界区也反映一定程度的能量积累特性。  相似文献   

基于GPS速度场的云南地壳应力积累特征分析     

唐红涛  贾鹏  刘芳 《大地测量与地球动力学》2018,38(2):125-128

利用2009~2015年的GPS水平运动速度场数据，解算云南地区的地壳应变场，在红河断裂与曲江断裂选取两个GPS剖面，计算并分析两个断裂的应变积累特征。结果显示：1）红河、曲江、小江等多个主要断裂应变场存在张、压交替的时空演化特征，近期曲江断裂南段表现为东西向拉张，红河断裂北段东西向拉张量值较大，约12.0×10-8/a，云南南部主要表现为NNE向的压性变化；2）从GPS剖面看，红河、曲江断裂在两个方向上均显示右旋走滑与拉张的变化特征，从量值上看，红河断裂北段运动速率较大,约8.90 mm/a。  相似文献   

The recognition of former melt flux through high‐strain zones          下载免费PDF全文

Catherine A. Stuart  Sandra Piazolo  Nathan R. Daczko 《Journal of Metamorphic Geology》2018,36(8):1049-1069

High‐strain zones are potential pathways of melt migration through the crust. However, the identification of melt‐present high‐strain deformation is commonly limited to cases where the interpreted volume of melt “frozen” within the high‐strain zone is high (>10%). In this contribution, we examine high‐strain zones in the Pembroke Granulite, an otherwise low‐strain outcrop of volcanic arc lower crust exposed in Fiordland, New Zealand. These high‐strain zones display compositional layering, flaser‐shaped mineral grains, and closely spaced foliation planes indicative of high‐strain deformation. Asymmetric leucosome surrounding peritectic garnet grains suggest deformation was synchronous with minor amounts of in situ partial melting. High‐strain zones lack typical mylonite microstructures and instead display typical equilibrium microstructures, such as straight grain boundaries, 120° triple junctions, and subhedral grain shapes. We identify five key microstructures indicative of the former presence of melt within the high‐strain zones: (a) small dihedral angles of interstitial phases; (b) elongate interstitial grains; (c) small aggregates of quartz grains with xenomorphic plagioclase grains connected in three dimensions; (d) fine‐grained, K‐feldspar bearing, multiphase aggregates with or without augite rims; and (e) mm‐ to cm‐scale felsic dykelets. Preservation of key microstructures indicates that deformation ceased as conditions crossed the solidus, breaking the positive feedback loop between deformation and the presence of melt. We propose that microstructures indicative of the former presence of melt, such as the five identified above, may be used as a tool for recognising rocks formed during melt‐present high‐strain deformation where low (<5%) volumes of leucosome are “frozen” within the high‐strain zone.  相似文献   

Dynamic modelling of retrogressive landslides with emphasis on the role of clay sensitivity          下载免费PDF全文

Xue Zhang  Scott W. Sloan  Eugenio Oñate 《国际地质力学数值与分析法杂志》2018,42(15):1806-1822

This paper presents a detailed numerical study of the retrogressive failure of landslides in sensitive clays. The dynamic modelling of the landslides is carried out using a novel continuum approach, the particle finite element method, complemented with an elastoviscoplastic constitutive model. The multiwedge failure mode in the collapse is captured successfully, and the multiple retrogressive failures that have been widely observed in landslides in sensitive clays are reproduced with the failure mechanism, the kinematics, and the deposition being discussed in detail. Special attention has been paid to the role of the clay sensitivity on each retrogressive failure as well as on the final retrogression distance and the final run‐out distance via parametric studies. Moreover, the effects of the viscosity of sensitive clays on the failure are also investigated for different clay sensitivities.  相似文献   

Equivalent continuum strain calculations based on 3D particle kinematic measurements of sand          下载免费PDF全文

Siavash Amirrahmat  Khalid A. Alshibli  Maha F. Jarrar  Boning Zhang  Richard A. Regueiro 《国际地质力学数值与分析法杂志》2018,42(8):999-1015

Constitutive modeling of granular materials has been a subject of extensive research for many years. While the calculation of the Cauchy stress tensor using the discrete element method has been well established in the literature, the formulation and interpretation of the strain tensor are not as well documented. According to Bagi, 1 researchers mostly adopt well‐known continuum or discrete microstructural approaches to calculate strains within granular materials. However, neither of the 2 approaches can fully capture the behavior of granular materials. They are considered complementary to each other where each has its own strengths and limitations in solving granular‐mechanics problems. Zhang and Regueiro 2 proposed an equivalent continuum approach to calculating finite strain measures at the local level in granular materials subjected to large deformations. They used three‐dimensional discrete element method results to compare the proposed strains measures. This paper presents an experimental application of the Zhang and Regueiro 2 approach using three‐dimensional synchrotron microcomputed tomography images of a sheared Ottawa sand specimen. Invariant Eulerian finite strain measures were calculated for representative element volumes within the specimen. The spatial maps of Eulerian octahedral shear and volumetric strain were used to identify zones of intense shearing within the specimen and compared well with maps of incremental particle translation and rotation for the same specimen. The local Eulerian volumetric strain was compared to the global volumetric strains, which also can be considered as an averaging of all local Eulerian volumetric strains.  相似文献   

Effect of microstructure on stress–strain and pore-pressure response of sabarmati sand under the influence of mica     

P. Seethalakshmi 《Geomechanics and Geoengineering》2020,15(2):123-139

ABSTRACT

Micaceous soil is believed to be detrimental for civil engineering constructions due to the effect of high compressibility, low compacted density and low shear strength. Individual mica particle has numerous intact mica flakes foliated over each other making it flexible upon loading and rebound upon unloading due to its low hardness and resilient nature. Hence, micaceous soils with mica content more than 10% are considered undesirable for highway pavements, embankments and railway track constructions. When platy mica particles are sufficiently numerous to interact with spherical sand particles, bridging and ordering phenomena are augmented within the soil mass creating unique sand-mica particle orientation (MS microstructure) unlike sand-sand particle orientation (PS microstructure). The current experimental research was conducted to evaluate the variation in stress–strain, pore pressure and effective stress path response of Sabarmati sand under the influence of mica (sand with 30% mica and pure sand) with MS and PS microstructure respectively. Effect of particle crushing on stress–strain and pore pressure response was also studied on Sabarmati sand with MS and PS microstructure. Distinctive macroscopic response was observed in Sabarmati sand with MS microstructure under the influence of mica as well as mica particle crushing.  相似文献   

Neotectonics of the Kharaulakh sector of the Laptev Shelf     

V.S. Imaev  L.P. Imaeva  O.P. Smekalin  A.V. Chipizubov  A.N. Ovsyuchenko  I.I. Kolodeznikov 《Russian Geology and Geophysics》2018,59(7):813-826

Seismotectonic deformation and crustal stress pattern have been studied comprehensively in major seismogenic structures of the Kharaulakh sector of the Verkhoyansk fold system and adjacent parts of the Chersky seismotectonic zone. The study focuses on neotectonic structures, deep structure, and systems of active faults, as well as tectonic stress fields inferred by tectonophysical analysis of Late Cenozoic faults and folds. The results, along with geological and geophysical data, reveal main strain directions and structural patterns of crustal stress and strain in the Arctic segment of the Eurasia-North America plate boundary. The area is a junction of mid-ocean and continental structures evolving in a mixed setting of extension, compression, and their various combinations. The rotation pole of the two plates is presumably located near Buor-Khaya Bay. In this case, extension is expected to act currently upon the neotectonic structures north of the bay and compression to control those in the south and southeast. This inference is consistent with the identified zoning of stress and strain in the Kharaulakh sector.  相似文献   

青藏高原东南缘现今地壳形变与多尺度应变率场特征     

陈斌  瞿伟  张勤  王庆良  郝明 《大地测量与地球动力学》2022,42(10):1047-1055

利用青藏高原东南缘1999~2007年与2011~2017年高精度GNSS监测资料,充分顾及GNSS测站非均匀分布的特性,构建青藏高原东南缘地壳形变多尺度球面小波模型,定量分析汶川强震前后该区域地壳形变与不同空间尺度下地壳应变率场变化特征。研究结果表明,汶川强震前后研究区整体地壳运动具有一定继承性发展特征,均在龙门山、安宁河、则木河与小江断裂处形成明显的速度差异梯度带,且高应变率值也主要聚集在上述主干断裂及附近区域;汶川强震后,研究区域整体地壳运动速率量值,特别是龙门山断裂带西北侧地壳运动速度量值显著增大,羌塘、巴颜喀拉与川滇地块也呈现出加速向南东运移并推动华南块体的趋势。不同尺度下的应变率场反映出不同空间范围下区域应变积累特征,青藏高原东南缘区域在尺度因子q=7时的计算结果是合理的（合理的最大尺度因子）;当尺度因子q=6时,能较好地揭示出区域整体构造活动特性,即清晰地揭示出汶川强震后龙门山断裂处呈现出的显著主压应变、面压缩与最大剪应变率高值特征;当尺度因子q=3~7时（最佳组合尺度因子）,可较好地综合揭示出区域地壳大尺度（整体）形变与局部形变特征。汶川强震后,研究区域主干断裂带,特别是震中及其附近区域地震活动性显著增强。  相似文献   

不同采样率下四分量钻孔应变观测同震变化特征     

唐磊  邱泽华  樊俊屹  罗自浩 《大地测量与地球动力学》2022,42(11):1196-1201

利用湟源台四分量钻孔应变观测的分钟值、1 sps、10 sps和100 sps四种不同采样率的观测数据,通过自检分析、同震应变阶分析和频谱分析等方法研究青海玛多M7.4地震同震变化特征。研究结果表明,分钟采样记录的地震波信息缺失严重,用分钟采样数据进行地震波初动、同震变化幅度等研究将会得到信度较低的结论;采样率越高,记录应变地震波信息的能力越强,但100 sps采样和10 sps采样结果相差不大,10 sps采样已能记录到比较全面的应变地震波信息;同震应变阶的变化性质和变化幅度与采样率无关;未来布设四分量钻孔应变仪时,建议应将采样率至少提高至1 sps。  相似文献